Normal Thermite Can Cut Vertically Through Steel Proof, Debunkers claims finally destroyed
Nov 11 2010, 08:51 AM
Group: Private Forum Pilot
Joined: 8-November 08
Member No.: 3,978
Hey look check this out guys this video is great this is flaming fantastic, it is a video of well known 9/11 truther who assembles
some structural steel the way it would have been assembled in the wtc twin towers and other buildings made of structural steel
and he cuts righ through the thick structural steel, well thats kind of a lie he cuts almost all the way through the entire length of
the steel member, using normal thermite using barrium nitrate and sulphur well if this is how it was really done on 911 those cuts even if they dont cut completely all the way still would have weakened the structural steel enough to cause the entire structure to loose alot of it strength enough to bring about a casatrophic global collapse resulting in a gravity driven CD, and watch when he uses the thermite and creates his own charges and the thermite explodes it even creates a hole giving a swiss cheese like appearance, similar to the samples found from the wtc buildings.
Does this video completely destroy the duh bunkers claims that thermite cannot create vertical cuts through steel beams, and also there
claims that you couldnt use normal thermite to demolish a steel framed building?
I have another question why would you use barrium nitrate and sulphur mixed in with normal thermite to cut through structural steel
how would these chemicals improve the thermites cutting power?
9/11 Experiments: The Great Thermate Debate
(IMG:http://pilotsfor911truth.org/forum/style_emoticons/default/whistle.gif) (IMG:http://pilotsfor911truth.org/forum/style_emoticons/default/whistle.gif) (IMG:http://pilotsfor911truth.org/forum/style_emoticons/default/whistle.gif)
Nov 13 2010, 08:56 PM
Joined: 23-December 09
Member No.: 4,814
The floor collapse can be timed at about 100 feet per second which is about 63 mph. The collapse accelerated from 0 mph to 63mph which was its terminal velocity if you drop a rock
sec / ft traveled
0 / 0
0.5 / 5
1 / 16
1.5 / 36
2 / 64
2.5 / 100
3 / 145
3.5 / 197
This is at free fall with no resistance. So if the acceleration was 60% of free fall it would reach ~63 mph in about 3 seconds.
The columns collapsed from several causes and mechanisms. There were 47 and all of rows 500 and 600 survived the collapse of the floors as high 40, 50 and even 72 floors. Row 500 and 600 were still joined by the lateral beams up to about the 40th floor. A few of the columns stood with no bracing left. One of the topples over to the east. 501-601 wobbles back and forth. It was too tall slender and unstable for its height. Even without any explosives a 600' tall column made up of sections 36' long could not stand without guys and or lateral support. See Euler's formula about column buckling related to slenderness.
Most of the columns in the core cam apart with the avalanche which destroyed the lateral support between them and the debris falling chaotically broke them apart. The splices were not meant to resist that kind of movement and they were only welded at the edges of the splice plates.
The columns above the strike zone which likely were attacked by thermite or similar might have not only destroyed the splices, but destroyed the bearing so the columns buckled or translated laterally. The steel frame broke apart at the joints. This is seen throughout the debris. Have a look see.
This post has been edited by SanderO: Nov 13 2010, 08:58 PM
|Lo-Fi Version||Time is now: 24th May 2013 - 02:42 PM|