Found this interesting footage of the towers being filmed before collapse
by the camera planet and the camera man zooms in on the location where
the plane went into the building and left a gaping hole but what can be seen
is rather puzzling what appears to be two or more glowing red hot outer
perimeter columns hanging down from above the hole with a whitish smoke
pouring from the left of the columns which may or may not be smoke from the
glowing columns but might not be from them.
The video can be found here located at about 3:08 sec
Shot of two towers burning from street level. Shot of...
http://www.youtube.com/watch?v=xfRLEjzHef0
And the screen shot captures
http://img406.imageshack.us/i/wtcglowingredhotperimet.png/
http://img138.imageshack.us/i/wtcglowingredhotperimit.png/
What is puzzling is why are there a couple of glowing red hot perimeter columns
in an area of the towers where there is no raging fire or hot heat source so the
question is what is providing the large amount of heat required to keep these
perimeter columns at a hot enough temperature to cause them to glow near
melting point?
Is thermate responsible for causing these columns to reach such a high temperature
that is one question that must be answered or is something else responsible?
Whatever caused these columns to glow red hot may have also have been responsible
for the molten steel/iron seen dripping from the towers prior to collapse which could
strongly indicate that the columns where purposely cut using an thermite incendary
charge, the columns could also be glowing red hot because they have just been heated
up and cut by an incindary charge.
Full Version: Evidence Of Glowing Red Hot Perimeter Columns Wtc
QUOTE (Paul @ Feb 28 2010, 09:22 AM) 
Found this interesting footage of the towers being filmed before collapse
by the camera planet and the camera man zooms in on the location where
the plane went into the building and left a gaping hole but what can be seen
is rather puzzling what appears to be two or more glowing red hot outer
perimeter columns hanging down from above the hole with a whitish smoke
pouring from the left of the columns which may or may not be smoke from the
glowing columns but might not be from them.
The video can be found here located at about 3:08 sec
Shot of two towers burning from street level. Shot of...
http://www.youtube.com/watch?v=xfRLEjzHef0
And the screen shot captures
http://img406.imageshack.us/i/wtcglowingredhotperimet.png/
http://img138.imageshack.us/i/wtcglowingredhotperimit.png/
What is puzzling is why are there a couple of glowing red hot perimeter columns
in an area of the towers where there is no raging fire or hot heat source so the
question is what is providing the large amount of heat required to keep these
perimeter columns at a hot enough temperature to cause them to glow near
melting point?
Is thermate responsible for causing these columns to reach such a high temperature
that is one question that must be answered or is something else responsible?
Whatever caused these columns to glow red hot may have also have been responsible
for the molten steel/iron seen dripping from the towers prior to collapse which could
strongly indicate that the columns where purposely cut using an thermite incendary
charge, the columns could also be glowing red hot because they have just been heated
up and cut by an incindary charge.
by the camera planet and the camera man zooms in on the location where
the plane went into the building and left a gaping hole but what can be seen
is rather puzzling what appears to be two or more glowing red hot outer
perimeter columns hanging down from above the hole with a whitish smoke
pouring from the left of the columns which may or may not be smoke from the
glowing columns but might not be from them.
The video can be found here located at about 3:08 sec
Shot of two towers burning from street level. Shot of...
http://www.youtube.com/watch?v=xfRLEjzHef0
And the screen shot captures
http://img406.imageshack.us/i/wtcglowingredhotperimet.png/
http://img138.imageshack.us/i/wtcglowingredhotperimit.png/
What is puzzling is why are there a couple of glowing red hot perimeter columns
in an area of the towers where there is no raging fire or hot heat source so the
question is what is providing the large amount of heat required to keep these
perimeter columns at a hot enough temperature to cause them to glow near
melting point?
Is thermate responsible for causing these columns to reach such a high temperature
that is one question that must be answered or is something else responsible?
Whatever caused these columns to glow red hot may have also have been responsible
for the molten steel/iron seen dripping from the towers prior to collapse which could
strongly indicate that the columns where purposely cut using an thermite incendary
charge, the columns could also be glowing red hot because they have just been heated
up and cut by an incindary charge.
Here's a better picture of the impact zone in WTC 1.
Which columns are you referring to?
I see what appears to be glowing metal, and that is an interesting point.
It appears to be part of the exoskeleton metal, which might make it part of the exterior columns, as I understand the terminology.
That should not be there it seems, unless something could make it become that hot.
It appears to be part of the exoskeleton metal, which might make it part of the exterior columns, as I understand the terminology.
That should not be there it seems, unless something could make it become that hot.
QUOTE (DoYouEverWonder @ Mar 1 2010, 01:52 AM)
Here's a better picture of the impact zone in WTC 1.
Which columns are you referring to?
Which columns are you referring to?
The ones in the picture i just posted a link to can you see them glowing?
If you cant see them try viewing the youtube video, other than that i cant help
it if you can see them.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.